Glock Mos Adapter Plate - Forward Controls Design OPF-G Trijicon Mounting Plate for Glock MOS The OPF-G is a mounting plate designed to mount the Trijicon RMR or SRO to your Glock MOS pistol.
OPF-G, RMR (Optics Platform, for Glock, RMR) Glock MOS Adapter Set 01 and Set 02 is a compatible plates for mounting on Trijicon RMR or SRO Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 . (25mm/1 inch wide.) and the G40 uses the 02 series. Glock's OEM MOS plate width matches the slide plate, but the OPF-G, RMR is already wider which fully supports the RMR, so it fits all MOS equipped Glocks. Slide
Glock Mos Adapter Plate
We like the idea of the Glock MOS, although we find that the factory MOS adapter plate could use some help. Standard, common, there are good parts. Until now, users had to submit their own slides to accept the small red dot for digging, or choose ready-made third-party slides. Despite the time it takes to transport the slide for digging, and the different quality of the work of the factory and the optical slide, there is a lack of standards for the height of the sight, it would be a coincidence that the two slides were milled by two different people. Shops have the same visual height. Glock's MOS may not sit low for some, but in our opinion, it more than makes up for what MOS has to offer, which is sight height, ease of installation, common parts, and availability.
Gun Review: Glock G19 Gen4 Mos & G17 Gen4 Mos
OPF-G is a collaboration with RMR USMC fighter and former USMC women's team coach, Tom Shields. We used Glock's MOS adapter plate as a base, and designed our own version of what we thought it should be and could be.
1. The sight should be fully supported front and back by setbacks / obstacles with less movement.
OPF-G, RMR achieves all the objectives mentioned above. The OPF-G's thickness, RMR does not change compared to the Glock MOS plate, does not change the sight height, and it requires a different iron height.
OPF-RMR plate and slide screws (M3-0.5mm x 6mm, same as used by Glock MOS plate) and sight screws (6/32 x 3/8), T10 wrench, and VC3 are delivered with the kit.
Glock Mos Adapter Set 01 For Standard And Full Size Pistols
OPF-G, RMR is designed for Trijicon RMRs and SROs. If you use long screws with Holosun and OPF-G, RMR, you risk damaging the board. We do not support Holosun OPF-G, RMR,
Trijicon has a tolerance of +/- 0.005 between RMR front radius edge and backlash. Although OPF-G, RMR has been tested on our RMR and SRO, there is always the possibility that it may not fit without adjusting your RMR / SRO. OPF-G, RMR's design provides good visibility between the front and rear baffles of the panel. Some adjustments may be required. A competent gunsmith can easily make a plate to fit your sight if you are not comfortable with it. Our store will be closed from 23/01/19 to 01/23/23. Website orders not placed by 2:00pm EST on 1/19 will begin shipping on 01/23/2019. Local collection will be limited at this time. Thank you for your patience! Earn valuable rewards points when you create an account, shop and leave comments! See how in the customer service tab. Free shipping on all NFA guns and lines. Free shipping on orders over $400 (excluding ammunition). Special pricing applies to select HOLOSUN and AIMPOINT optics... ADD THEM TO YOUR CART FOR MORE SAVINGS Boresight Solutions is proud to be your trusted source for custom/portable rifles and quality accessories for 20 years. thank you!
C&H Precision Weapon Systems (CHWPS) GL-RSH GLOCK MOS kit for Trijicon RMR / RMR footprint Holosuns. Not TRIJICON for RMRCC and not for 43X MOS or 48 MOS.
The CHPWS adapter plate has been developed over the past five years to replace the OEM mounting plate as the weakest link in the Red Dot system.
Forward Controls Design For Glock 17/19 Compatible Mos Mounting Plate
Patent-pending replaceable stainless steel nuts and stainless steel head Torx® screws, used for RDS (Red Dot System) board mounting, allow you to replace the mounting hardware without replacing the entire board. Six to seven full turns of thread retention for maximum retention.
Disclaimer: This product is not manufactured, licensed, endorsed or guaranteed by GLOCK. GLOCK DOES NOT WARRANT OR REPRESENT THAT THIS PRODUCT IS COMPATIBLE WITH GLOCK PISTOLS.
GL-RSH series. Fits Trijicon RMR/SRO, Holosun 407C, 407C V2, 507C, 507C V2, 508T and 508T V2. The CHPWS package evolves, but we have the latest version directly from CHPWS.
Patent-pending replaceable stainless steel nuts and stainless steel head Torx® screws, used for RDS (Red Dot System) board mounting, allow you to replace the mounting hardware without replacing the entire board. Six to seven full rounds for maximum retention of line engagement.
Used Glock 34 Gen 4 Mos 9x19mm 34 Hand Gun Buy Online
*This kit eliminates the need for an RMR seal, but can be used if required by policy to use one.
With changing rifle slide tolerances (overall), some CHPWS kits may require minor adjustments to achieve proper fit. This is not a mistake. The sheet is made of aluminum and is easily placed with a small file. If adjustments are required, remove minimal documentation and test file adjustments between passes. CHPWS product return/exchange restrictions are at our discretion.
Glock 34 mos review, glock mos adapter plates, glock mos plate kit, glock mos cover plate, glock mos holster, glock mos for sale, glock 17 mos holster, glock g19 mos, glock mos screws, glock mos rmr plate, glock 19 mos holster, what is glock mos